BLPMG - 33-087-00 POLYLITE
- MSDS: BLPMG
- Manufacturer: REICHHOLD CHEMICALS INC
- Product Name: 33-087-00 POLYLITE
- National Stock Number: 8040-00F019136
Product Identification
Product ID:33-087-00 POLYLITE
MSDS Date:03/19/1990
FSC:8040
NIIN:00F019136
MSDS Number: BLPMG
Responsible Party
DURHAM, NC 27713
Emergency Phone: (800) 424-9300
Info Phone: (919) 544-9225
Cage: 86744
Contractor
Cage: 86744
Ingredients
POLYESTER RESIN
Fraction By Weight: 60%
STYRENE, MONOMER (SARA III)
CAS: 100-42-5
RTECS: WL3675000
Fraction By Weight: 50%
OSHA PEL 100 PPM
ACGIH TLV: S,50PPM/100STEL;9293
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO
Health Hazards Acute and Chronic:SKIN: DEFATTING, DRYNESS, DERMATITIS,
& ABSORPTION. EYES: IRRITATION, LACHRYMATION OR LINING. INHALATION:
MUCOUS MEMBRANE IRRITATION, UPPER RESPIRATORY TRACT DISCOMFORT,
HEADACHE, NAUSEA, INSENSIBILIT Y, CENTRAL NERVOUS SYSTEM EFFECTS,
LIVER, & KIDNEY DAMAGE. INGESTION: GASTROINTESTINAL DISTURBANCES,
PAIN, & DISCOMFORT.
Explanation of Carcinogenicity:STYRENE MONOMER IS A SUSPECTED HUMAN
CARCINOGEN BY ACGIH.
Effects of Overexposure:SKIN: DEFATTING, DRYNESS, IRRITATION,
DERMATITIS, & ABSORPTION. EYES: IRRITATION, LACHRYMATION OR INJURY.
INHALATION: MUCOUS MEMBRANE IRRITATION, UPPER RESPIRATORY TRACT
DISCOMFORT, HEADACHE, NAUSEA, INSENSIBLITIY, & OTHER CNS EFFECTS,
LIVER & KIDNEY DAMAGE. INGESTION: GASTROINTESTINAL DISTURBANCES,
PAIN, & DISCOMFORT.
First Aid
First Aid:SKIN: WASH W/SOAP & WATER. EYES: FLUSH W/PLENTY OF WATER FOR
15 MINUTES. INHALATION: REMOVE TO FRESH AIR. IF UNCONSCIOUS,
ADMINISTER ARTIFICIAL RESPIRATION/OXYGEN AS NEEDED. INGESTION:
DON'T INDUCE VO MITING. ASPIRATION HAZARD. OBTAIN MEDICAL ATTENTION
IN ALL CASES.
Fire Fighting
Flash Point:89F
Lower Limits:1.1%
Extinguishing Media:WATER SPRAY, FOAM, DRY CHEMICAL, CO2, OR ANY CLASS
B EXTINGUISHING AGENT
Fire Fighting Procedures:WEAR SELF-CONTAINED BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:IF POLYMERIZATION TAKES PLACE IN A CLOSED
CONTAINER, VIOLENT RUPTURE OF CONTAINER IS POSSIBLE. PRODUCT VAPOR
MAY FORM EXPLOSIVE MIXTURES IN AIR. FLAMMABLE.
Accidental Release
Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. VENTILATE
AREA. ABSORB SPILL W/ABSORBENT MATERIAL SUCH AS SAWDUST,
VERMICULITE OR SAND & PLACE IN CONTAINER. DIKE THE AREA TO PREVENT
MATERIAL FROM ENTERING WATER SYSTE MS OR SEWERS.
Handling
Handling and Storage Precautions:DON'T STORE >100F. AVOID SKIN CONTACT
& INHALATION OF VAPORS OR SPRAY MISTS. FIREFIGHTING EQUIPMENT
SHOULD BE DECONTAMINATED AFTER USE.
Other Precautions:AVOID IMPROPER ADDITION OF PROMOTER/CATALYST. A
PROMOTER/CATALYST USED W/PRODUCT SHOULD ALWAYS BE MIXED SEPARATELY
& NEVER MIXED TOGETHER.
Exposure Controls
Respiratory Protection:USE A CANISTER-TYPE RESPIRATOR TO PREVENT
INHALATION OF VAPORS OR SPRAY MISTS IF >TLV.
Ventilation:GENERAL, DURING NORMAL USE OR LOCAL IF REQUIRED
Protective Gloves:IMPERVIOUS
Eye Protection:FACE SHIELD OR CHEMICAL GOGGLES
Other Protective Equipment:PROTECTIVE CLOTHING, EYE WASH STATION &
SAFETY SHOWER.
Supplemental Safety and Health
Chemical Properties
Boiling Pt:B.P. Text:295F
Vapor Density:>AIR
Spec Gravity:1.1
Evaporation Rate & Reference:SLOWER THAN N-BU AC
Appearance and Odor:AMBER OPAQUE LIQUID W/PUNGENT ODOR
Percent Volatiles by Volume:40-50%
Stability
Stability Indicator/Materials to Avoid:YES
STRONG ACIDS & OXIDIZING AGENTS
Stability Condition to Avoid:HEAT, DIRECT SUNLIGHT, SOURCES OF IGNITION
Hazardous Decomposition Products:ACRID FUMES
Conditions to Avoid Polymerization:ELEVATED TEMPERATURES SUCH AS IN A
FIRE, HEAT OR DIRECT SUNLIGHT.
Disposal
Waste Disposal Methods:TREAT AS HAZARDOUS WASTE MATERIAL. DISPOSE OF
MATERIAL & CONTAINER IN COMPLIANCE W/APPLICABLE LABELING,
PACKAGING, & RECORD KEEPING STANDARDS. DISPOSE OF IN ACCORDANCE
W/FEDERAL, STATE, & LOCAL REGULA TIONS. FLAMMABLE LIQUID UN 1866.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.